In the design of this machine, a small amount of glue is first glued to the sticking rod through the rubber wheel, and then a label is glued to the label box. On the belt of the box, the label is attached to the belt of the vacuum box by using the suction in the vacuum box, and enters the sticking place to stick the label on the bottle supplied by the bottle feeder, and the cycle works like this. Therefore, in order to make the product beautiful and the machine run smoothly, the operator must have the following concepts:
Glue treatment - the glue usually uses water-soluble resin glue, which is selected according to the material of the bottle to be pasted.
When adjusting the amount of glue, do not adjust too much, just have a layer of film on the rubber wheel: because too much glue can not increase the viscosity of the glue, too much glue will make the label stick when it is pasted. , due to the extrusion of the bottle, the excess glue will be left on the position of the vacuum box, the belt of the vacuum box and the sponge board, so that the label may be attached to the belt or the sponge board when the machine is running, so the glue should not be adjusted too much many.
Label processing--In order to make the label fully attached to the bottle and increase the beauty of the product, the label should be kept flat so that it can be fully glued. However, since the label will curl under the effect of moisture in the air when the label is preserved, the label must be fixed and supported by hard plates before and after preservation, and then tightened with a rubber band. It is more important to straighten the direction of the inwardly bent fibers when printing.
Bottle handling - when the bottle is labeled, there must be no oil stains or dust on the outside of the bottle.
Parameter
| Name |
Automatic linear cold glue labeling machine |
| bottles'diameter |
30-95mm |
| Labeled Body Dimension |
L50-280mm*W40-150mm |
| Air Pressure |
4-6kgs |
| Capability |
4000-5000bottles per hour |
cold glue labeling machine is older type labeling machine,but it can save bigger cost than stick labeling machine.
1. What is your sample service?
We can send you the video of the finished machine or you can welcome to visit our company and see the machine running in the factory.Or if we get the permission of the customer who has brought the machines from us,we can tell you our customers'contact information,you can go to visit their factory.
2. What is your after sale service?
We will send technicians overseas,commissions and operator training.Our warranty period is 12 months,in this period,we provide free parts for buyer as well as the necessary technical support.Out of warranty period,we offer free technical support and the cost of spare parts.
3. How about the spare parts?
After we finish all the things,we will offer you a spare parts list for your reference.
4. What services are there during the production?
We will cooperate with buyers and update the manufacturing process and status to buyers and we will invite buyer come to test the machine when the goods finished in our factory, if the buyer think it is ok,we will arrange shipping or we can make the testing video and send it to buyer.
5. How to customize the service?
We can design the machines according your requirements (material,power,filling type,the kinds of the bottles and so on),at the same time we will give you our professional suggestion.
We can offer free technical support and consultation,draw the factory layout.
){kind=link}